- The Subnautica 2 Bioscanner is a crucial scanner upgrade for analyzing alien technology and lifeforms.
- It is found within the Cicada Wreck (EVA Prep), located in the Alien Ruins.
- Crafting requires a Modification Station, 1x Scanner, 2x Enameled Glass, and 3x Conduit Crystal.
- The Bioscanner allows you to unlock new Biomods at the Biolab by scanning lifeforms.
- A Repair Tool is essential for navigating and exiting the wreckage.
Locating the Subnautica 2 Bioscanner
The Bioscanner is a vital upgrade in Subnautica 2, allowing players to delve deeper into the mysteries of alien structures and enigmatic lifeforms. Unlike the standard scanner, the Bioscanner provides critical insights into Axum technology, which is indispensable for progression. To acquire this advanced tool, players must venture into the treacherous Alien Ruins, specifically targeting the Cicada Wreck (EVA Prep).
This wreck is situated far to the east of your starting Lifepod, past the Tadpole Pens. It's highly recommended to establish a temporary base or at least a waypoint at the Research Outpost within the Alien Ruins before proceeding, as the journey can be extensive. The Cicada Wreck is often found near a large alien turbine, east-northeast of the Alien Ruins region.
Video Highlights:
- Travel approximately 1,200 meters from the Lifepod to the Research Outpost in the Alien Ruins.
- Head towards the east-southeastern section, or between the E and SE marks (around 120 degrees).
- The Bioscanner is located inside a wreckage, accessible without specific quest progression.
- Bring a Repair Tool to open doors and facilitate movement within the wreck.
Upon reaching the Cicada Wreck, prepare for exploration. The interior holds not only the Bioscanner but also other valuable resources and upgrades. Ensuring you have sufficient inventory space and oxygen is crucial for a successful retrieval mission.
Consider setting up a small power relay or temporary storage at the Research Outpost. This will allow you to offload loot and recharge your equipment before making the final push to the Cicada Wreck.
Navigating the Cicada Wreck and Retrieving the Bioscanner
Entering the Cicada Wreck requires careful navigation and the right tools. The wreck can be dark and disorienting, but following a clear path will lead you directly to the Bioscanner blueprint. Always keep your scanner equipped to identify potential resources and other scannable items along the way.
Enter the Wreckage
Locate the yellow door on the left-hand side of the main ship structure. Use your Repair Tool to fix the doorway and gain access. The main room often contains several EVA Suits in pods and potentially Improved Fins in a crate, which you can scan.
Locate Key Items
Proceed to the next room. Here, you'll find the Iso blackbox and the Photovoltaic Charger, a useful upgrade module for your Tadpole. Be sure to scan the Modification Station blueprint if you haven't already, as you'll need it later to craft the Bioscanner.
Descend to the Bioscanner
Find a shaft leading downwards. Descend into this shaft. Keep an eye out for air tanks or bubbling vents that provide oxygen replenishment as you go. Continue downwards, following a bright red light.
Scan the Bioscanner Blueprint
At the very bottom of the shaft, you will discover the Bioscanner itself. Approach it and use your standard scanner to scan the device. This action will unlock the crafting blueprint for the Bioscanner in your fabricator system.
Exit the Wreck
You can either retrace your steps back up the shaft or use your Repair Tool to fix an alternative door for a quicker exit from the wreckage.
The Cicada Wreck can be deep, and oxygen management is crucial. Always keep an eye on your oxygen levels and utilize any available air pockets or bubbling vents to avoid suffocation.
Crafting and Utilizing the Bioscanner
Once you have the Bioscanner blueprint, the next step is to craft it. This requires specific materials that can be found within the Alien Ruins biome. The Bioscanner is crafted at a Modification Station, which you should have scanned earlier or find within the wreckage itself.
Crafting Requirements
To craft the Bioscanner, you will need:
- 1x Scanner: Your basic scanner tool.
- 2x Enameled Glass: Found in the Alien Ruins, appearing as clumps with multiple protrusions.
- 3x Conduit Crystal: Located in the Alien Ruins, resembling kelp-like objects near corrupted Rockbore/Angel Combs.
Bioscanner Usage
The Bioscanner significantly enhances your exploration capabilities:
- Alien Technology: It allows you to scan previously unscannable Axum technology, such as the massive turbines at the Karakorum Power Plant.
- Lifeform Analysis: You can scan various alien lifeforms to unlock new Biomods at the Biolab, expanding your personal adaptations.
- Enhanced Data: Provides more detailed information on scanned objects compared to the standard scanner.
The Bioscanner is not just an upgrade; it's a gateway to understanding the deeper lore and mechanics of Subnautica 2. Prioritize obtaining it to unlock advanced progression and unique character adaptations.
Essential Materials for Bioscanner Crafting
Gathering the necessary materials for the Bioscanner is a straightforward process once you know where to look within the Alien Ruins. Both Enameled Glass and Conduit Crystal are biome-specific resources.
| Material | Appearance | Location | Quantity Needed |
|---|---|---|---|
| Scanner | Standard handheld device | Starting equipment, or crafted at Fabricator | 1 |
| Enameled Glass | Clumps with multiple protrusions | Alien Ruins biome | 2 |
| Conduit Crystal | Kelp-like objects | Alien Ruins biome, near Rockbore/Angel Combs | 3 |
Materials Checklist:
- Obtain 1x Standard Scanner
- Collect 2x Enameled Glass from Alien Ruins
- Gather 3x Conduit Crystal from Alien Ruins
- Ensure access to a Modification Station
While exploring the Alien Ruins for crafting materials, keep an eye out for other valuable resources. The biome is rich with unique minerals and flora that might be useful for future upgrades and base construction.
Frequently Asked Questions about the Subnautica 2 Bioscanner
Q: What is the primary function of the Subnautica 2 Bioscanner?
The Bioscanner is an upgraded scanner that allows players to analyze alien technology (Axum structures like turbines) and various lifeforms, which are otherwise unscannable with the standard tool. Scanning lifeforms with it can unlock new Biomods at the Biolab.
Q: Where can I find the Bioscanner blueprint in Subnautica 2?
The Bioscanner blueprint is located within the Cicada Wreck (EVA Prep) in the Alien Ruins, specifically at the bottom of a shaft inside the wreckage. You'll need to scan it to learn the crafting recipe.
Q: What materials are required to craft the Bioscanner?
To craft the Subnautica 2 Bioscanner, you need 1x Scanner, 2x Enameled Glass, and 3x Conduit Crystal. These materials are primarily found within the Alien Ruins biome.
Q: Do I need a specific tool to access the Bioscanner's location?
Yes, a Repair Tool is essential. You'll use it to fix doorways within the Cicada Wreck, both to gain entry and potentially to create a quicker exit.